RDM算法應用于SAR動目標檢測時參數選擇原則
THE PARAMETER CHOICE OF RDM IN MTI-SAR
-
摘要: 該文針對雷達系統方位向波束較小的情況下RDM的參數選擇問題進行了探討,指出了RDM參數選擇的決定因素,并將這種原則應用于雷達方位向波束僅為9的LSAR,實驗證明也可以達到較好的檢測效果。
-
關鍵詞:
- RDM; 運動目標檢測; 參數選擇
Abstract: In this paper, the question of the parameter choice of RDM (reflectivity displacement method) for the radar system that has a narrow azimuth antenna beam is discussed and the important factors that determine the choice of the parameters are proposed. Experiments using raw data of L SAR that has an azimuth beam of only 9 show that good detection result can be achieved when applied these principles for parameter choice. -
J.R. Moreira, A new method of aircraft motion error extraction from radar raw data for realtime motion compensation, IEEE Trans. on GRS, 1990, 28(4), 620-626.[2]J.R. Moreira, Wolfgang Keydel, A new MTI-SAR approach using the refiectivity displacement method, IEEE Trans. on GiRS, 1995, 33(5), 1238-1244.[3]張冰塵,合成孔徑雷達實用化運動目標檢測和成像技術的研究,[碩士論文],北京,中科院電子所,1999. -
計量
- 文章訪問數: 2864
- HTML全文瀏覽量: 134
- PDF下載量: 551
- 被引次數: 0