星載ScanSAR工作模式研究與設計
Studies and design on space-borne ScanSAR system
-
摘要: 該文系統地闡述了星載ScanSAR系統的基本工作原理,由ScanSAR系統的空間幾何模型,確定了ScanSAR系統各子條帶的空間位置,研究了ScanSAR系統的方位分辨率問題,確定了ScanSAR系統工作的時間關系,各子條帶的脈沖重復頻率的選擇及每個burst的樣本數,為系統設計提供了依據。重點研究了 ScanSAR系統的信噪比及距離模糊問題,提出了一種新的 ScanSAR系統特有的模糊概念A(yù)RASR,并提出新的分析方法,對其影響做了定量的計算,最后對 ScanSAR系統的數據下載格式提出了建議。Abstract: Based on the principles of the space-borne ScanSAR, some important parameters to define the position of sub-swathes, the timing sequence of the system, the choice of the PRFs, the number of the samples of each burst and the SNR are investigated. Some critical problems about ScanSAR system are discussed, such as the number of the multi-looks, the azimuth resolution and the range ambiguities. A new concept of the range ambiguities is put forward, analyzed and verified. Based on above discussion and calculation, the data format for the practical ScanSAR system is suggested.
-
張澄波,綜合孔徑雷達:原理、系統分析與應用,北京,科學出版社,1989,第三章.[2]J.C. Curlander, R. N. McDonough, Synthetic Aperture Radar System and Signal Processing,New York, John Wiley Sons, Inc, 1991, Chapter 1. ［3］G.Franceschetti, R. Lanari, Synthetic Aperture Radar Processing, London, New York, Washing ton D.C., CRC Press, 1999, Chapter 5.[3]A.Curr. M. A. Brown, Wide-swath SAR, IEE Proc.-F, 1992, 139(2), 122-135. -
計量
- 文章訪問數: 2336
- HTML全文瀏覽量: 120
- PDF下載量: 571
- 被引次數: 0
下載:
