合成孔徑雷達中的二維自動增益控制
Two-Dimensional Automatic Gain Control in Synthetic Aperture Radar
-
摘要: 該文給出一種合成孔徑雷達接收機自動增益控制(AGC)的方法，該方法對合成孔徑雷達信號 進行二維平均，既保持了信號的原有特性,又提高了接收機的動態范圍。與傳統的自動增益控制方法相比，它能更好地消除短時間內的干擾以及保留合成孔徑雷達圖像中的對比度。該文在對二維AGC工作方式及時間參數選擇進行闡述之后，給出了二維AGC的計算機仿真結果以及雷達實際使用AGC后獲得的圖像。
-
關鍵詞:
- 合成孔徑雷達（SAR）; 二維AGC
Abstract: In this paper, a method of automatic gain control for synthetic aperture radar is given. In this way, radar signal is processed in two dimensions. Comparison to the traditional AGC, this method keeps the properties of signal and widens the dynamic range of the receiver. Then the operation mode and coefficient of 2-Dimensional AGC are described, and the computer simulation results and the real radar image are given. -
張澄波.綜合孔徑雷達.北京:科學出版社,1989,第一章.[2]丁鷺飛,耿富錄.雷達原理.西安:西安電子科技大學出版社.1995,66-69.[3]Ulaby, F T, Moore IR K, Fung A F. Microwave Remote Sensing and Surface Scattering and Emission Theory. Artech House, 1982, Ch.6.[4]袁孝康.自動增益控制與對數放大器.北京:國防工業出版社,1987,22-54.[5]M.I.斯科爾尼克著.王軍,林強等譯.雷達手冊.北京:國防工業出版社,1978. -
計量
- 文章訪問數: 2195
- HTML全文瀏覽量: 120
- PDF下載量: 728
- 被引次數: 0
下載:
