故障診斷和防止連鎖性故障的途徑
FAULT DIAGNOSIS AND THE APPROACH TO PREVENT CHAIN-FAULT
-
摘要: 本文討論了一種故障診斷技術以及決定b分支網絡中故障元件的位置和數值的方法。它是將電路的正常狀態作為伴隨電路與故障狀態比較,通過對某些可測節點或分支的幾次測量來完成的。 主要內容:(1)內部故障的外部映射;(2)故障狀態的擴散;(3)連鎖性故障的防止。
-
關鍵詞:
Abstract: In this paper, there is discussed a fault diagnosis technique and related method of calculation to determine the position and value of a fault component which happens to be in a b-branches network. This technique based on comparing the fault circuit with the adjoint circuit (which is named to indicate the original circuit in normal state) requires only a few measurements on some of accessible nodes or branches.Three main concepts are discussed in this paper: (1) The discussion about the external mapping of the internal faults; (2) The discussion about the extension of a fault state; (3) The discussion about the approach to proventing chain-fault. -
T. N. Trick, W. Mayeda, A. A. Sakla, Determination of Component Values from Node Voltage Measurements Proceedings of 1979 ISCAS, pp. 878-881.[2]R. S. Berkowitz. IRE Trans. on CT, CT-9 (1962), 24. -
計量
- 文章訪問數: 1698
- HTML全文瀏覽量: 136
- PDF下載量: 447
- 被引次數: 0
下載:
