反向外環功率控制的模型及其優化算法
The Model of Reverse outer-loop power control and its optimization
-
摘要: 該文針對cdma2000系統的反向鏈路，建立了反向外環的理論模型，展示了內環與外環間的緊密聯系，提出了一種誤幀率的簡化估計方法，并對該方法的估計誤差進行了分析，在此模型的基礎上，從減小用戶發射功率及誤幀率波動的目標出發，提出了一種外環功率控制的算法。該算法可以保證用戶在達到目標誤幀率的同時，發射功率最小，從而使系統的性能達到最優，該算法允許系統通過調整權系數以滿足不同的業務性能要求，因而有很好的靈活性，仿真結果驗證了所提出模型的正確性和優化算法的有效性。
-
關鍵詞:
- 外環功率控制; 寬帶碼分多址; 移動通信; 誤幀率
Abstract: An out-loop power control model for the cdma2000 reverse link is established, and the relationship between the inner-loop and the out-loop is revealed. As a result, a simple estimation method for Frame Error Rate (FER) is proposed and its performance is analyzed. Based on the model, an optimization algorithm for the out-loop power control is proposed which aims to jointly reduce the transmit power and FER variation. It can guarantee target FER while keeps transmit power at, the minimum level, resulting an optimal system performance. The algorithm allows the weighting factors to be adjusted to satisfy different Quality of Service (QoS) requirements, hence provides great flexibility. Finally, computer simulation is performed to show that, the model is appropriate and the optimization algorithm is effective and correct. -
J. Zander, Performance of optimum transmission power control in cellular radio systems, IEEE J. on SAC, 1992, 14(1), 57-62.[2]R.D. Yates, A framework for uplink power control in cellular radio system, IEEE J. on SAC, 1995, 13(7), 1341-1347.[3]T.H. Hu, M. Max, K. Liu, Power control for wireless multimedia CDMA systems, Electron.Lett., 1997, 33(2), 660-662.[4]A.J.Viterbi,著,李世鶴,等譯,CDMA擴頻通信原理,北京,人民郵電出版社,1997,第六章.[5]TIA/EIA/IS-2000-2a(Revision of TIA/EIA/IS-2000.2), Mar. 2000.[6]TIA/EIA/IS-2000-1XEV(Revision 4.0), Aug. 9, 2000.[7]曹志剛,錢亞生,現代通信原理,北京,清華大學出版社,1998,第十章.[8]祁玉聲,邵世祥,編著,現代移動通信系統,北京,人民郵電出版社,1999,第六章.[9]P.R. Chang, B. C. Wang, Adaptive fuzzy power control for CDMA mobile radio systems, IEEE Trans. on Veh. Technol., 1996, 45(2), 225-236. -
計量
- 文章訪問數: 2154
- HTML全文瀏覽量: 103
- PDF下載量: 747
- 被引次數: 0
下載:
