容差子網絡級故障診斷
FAULT DIAGNOSIS OF TOLERANCE SUBNETWORK
-
摘要: 該文在故障子網絡等效電流矢量的基礎上,討論了子網絡的測試特性,得到了容差條件下故障子網絡判斷的必要條件。該方法在診斷過程中可對各子網絡同時做出診斷,不但能加快診斷過程,而且可消除誤差傳遞性的問題,對于容差故障診斷具有理論和實際意義。Abstract: In this paper,the test property of fault subnetworks has been discussed based on the fault subnetwork equivalent current vector, and the essential condition for determinting fault subnetworks has been given. Using this method, every subnetwork may be diagnosed at the same time independently. The method not only may quicken diagnosis process, but also may solve the error transfer question. Thus, this paper should have theoretical and practical significance for tolerance fault diagnosis.
-
A.E. Salama et al., A unified decomposition approach for fault location in large analog circuit,IEEE Trans. on CAS, 1984, 31(7), 609-622.[2]C.C. Wu, et al., Analog fault diagnosis with failure bounds, IEEE Trans. on CAS, 1982, 29(5),277-284.[3]黃東泉等,子網絡級故障可診斷的拓樸條件,中國科學A輯,1991,21(12),1326-1332.[4]黃東泉,蔡金錠,子網絡故障診斷的誤區分析,電子學報,1995,23(8),75-77.[5]張友純,大規模電路島橋分析,電子科學學刊,1995,17(2),161-169.[6]孫繼廣,矩陣擾動分析,北京,科學出版社,1987,319-354.[7]楊祖櫻,張志涌,故障驗證體系的可診性理論,電子科學學刊,1996,18(2),158-162. -
計量
- 文章訪問數: 2205
- HTML全文瀏覽量: 82
- PDF下載量: 383
- 被引次數: 0
下載:
